MSP-CORE——Switch Core Module
MSP-CORE (Multi-Service Platform Core) core module is an open core module based on Ethernet routing and switching. And adopt linear switching and routing solution based on IP routing and switching;
MSP-CORE support various interface boards which need Ethernet-supported.
MRD™子午线®——Standard Constitution- DIN Rail
MRD™子午线®——Standard Constitution-Rack
MSP-CORE Core Board Composite Pattern
MRD™子午线®——Industrial Core Module—MSP-CORE16
100% industrial wide temperature components and imported tantalum capacitors;
PCB is accorded with IPC standard;
EMC 4;
Operating temperature is -40~85℃;
MRBF is more than 1000000 hours;
Adopt ENIG technology;
Fanless design;
MRD™子午线®——Industrial Core Module—MSP-CORE28
MRD™子午线®——Industrial Core Module Performance
Core module of linear switches with high performance and flexible configuration, support layer-3 function.
Support Ethernet function based on IEC62439 MRD-Ring. Support multiple self-healing ring. Self-healing time of node is less than 5ms, and the self-healing time of ring network is less than 50ms(typical).
Support MRP based on IEC62439-2.
Support PRP and HSR based on IEC62439-3.
Any two ports can be used to constitute a self-healing ring network and support multiple independent self-healing rings.
Support MODBUS/UDP/SNMP remote monitoring and various mainstream OPC software.
All ports, indicators and power supply are led out by connectors.
Core board uses ENIG process; 100% industrial wide-temperature components and imported tantalum capacitors; PCB is accorded with IPC standard.
EMC level 4, operating temperature -40~85℃, MTBF≥1000000h.
MRD™子午线®——Industrial Core Module Specification
Model |
Backboard Bandwidth |
Specification |
Size(mm) |
Consumption (MAX) |
MSP-
CORE16L2TX |
10.4Gbps |
Layer-2, 16 100M TX+4 1000M/100M Combo SFP ports |
130*100 |
10W |
MSP-
CORE16L2GT |
32Gbps |
Layer-2, 16 1000M TX+4 1000M/100M Combo SFP ports |
130*100 |
15W |
MSP-
CORE16L3TX |
10.4Gbps |
Layer-3, 16 100M TX+4 1000M/100M Combo SFP ports |
130*100 |
10W |
MSP-
CORE16L3GT |
32Gbps |
Layer-3, 16 1000M TX+4 1000M/100M Combo SFP ports |
130*100 |
15W |
MSP-CORE28L2TX |
10.4Gbps |
Layer-2, 24 100M TX+4 1000M/100M Combo SFP ports |
415*170 |
35W |
MSP-CORE28L2GT |
56Gbps |
Layer-2, 24 1000M TX+4 1000M/100M Combo SFP ports |
415*170 |
45W |
MSP-CORE28L3TX |
10.4Gbps |
Layer-3, 24 100M TX+4 1000M/100M Combo SFP ports |
415*170 |
35W |
MSP-CORE28L3GT |
56Gbps |
Layer-3, 24 1000M TX+4 1000M/100M Combo SFP ports |
415*170 |
45W |
MRD™子午线®——Industrial Core Module Accessories Specification(Optional)
Model |
Specification |
Size(mm) |
EMC |
MSP-CORE-
DDC30W |
Redundant dual DC input (12VDC~60VDC), 12VDC output and input status signal, rated power 30W. |
130*100*37 |
4 |
MSP-CORE-
DAC30W |
Single high voltage input (100~240V), 12VDC output and input status signal, rated power 30W. |
130*100*37 |
4 |
MSP-CORE-
DDC70W |
Redundant dual DC input (12VDC~60VDC), 12VDC output and input status signal, rated power 70W. |
130*100*37 |
4 |
MSP-CORE-
DAC70W |
Single high voltage input (100~240V), 12VDC output and input status signal, rated power 70W. |
130*100*37 |
4 |
MRD™子午线®——MSP-CORE16 Function List
|
|
Entry Name/Model |
MSP-CORE16 |
Switch Chip |
BCM53313 |
Mac Address |
8K |
Hardware Subnet Routing Table |
IPv4-126 IPv6-63 |
Ip cache Table |
IPv4-126 IPv6-63 |
Max Frame Size (Jumbo Frame) |
9K |
ffp Table (acl&qos) |
1K |
Vlan Table |
4K |
inter vlan Table |
256 |
Aggregation Number |
64 |
Port Queue Number |
8 |
Port Rate-limit |
64kpbs |
Interface number that Each Aggregated Port supported to bind |
8 |
Maximum Aggregated Port Number(Hardware) |
64 |
Maximum Static MAC Address |
Maximum MAC Address |
Layer-3 Multicast Address Table |
/ |
Layer-2 Multicast Address Table |
256 |
Buffer size |
512KB |
VRF support |
NO |
Number of Source/Destination Port Mirroring Pairs |
4 |
Maximum Supporting entry of Actual ACL、QoS |
小于1K |
MRD™子午线®——MSP-CORE28 Function List
|
|
Entry Name/Model |
MSP-CORE28 |
Switch Chip |
BCM56143 |
Mac Address |
8K |
Hardware Subnet Routing Table |
IPv4-64 IPv6-32 |
Ip cache Table |
IPv4-512 IPv6-256 |
Max Frame Size (Jumbo Frame) |
9K |
ffp Table (acl&qos) |
1K |
Vlan Table |
4K |
inter vlan Table |
256 |
Aggregation Number |
128 |
Port Queue Number |
8 |
Port Rate-limit |
64kpbs |
Interface number that Each Aggregated Port supported to bind |
8 |
Maximum Aggregated Port Number(Hardware) |
128 |
Maximum Static MAC Address |
Maximum MAC Address |
Layer-3 Multicast Address Table |
IPv4-256 IPv6-128 |
Layer-2 Multicast Address Table |
1K |
Buffer size |
1.5M |
VRF support |
NO |
Number of Source/Destination Port Mirroring Pairs |
4 |
Maximum Supporting entry of Actual ACL、QoS |
小于1K |
MRD™子午线®——Product Stability:
1.MTBF—Mean time between failures
Based on SR-332 Algorithm
2.Lifetime—Average Lifetime
Based on the lowest operating parameters @ Operating Temperature Algorithm
3.Design—Details and experience of product design
The difference between air sucking and air blowing of the fan;
The difference between Conductive Oxidation and Spray Lacquer;
The difference between Immersion Gold and Tinplating;
The difference between single-port and multi-port of Network Transformer;
The difference between the lowest bottleneck of capacity and lifetime of electrolytic capacitor;
The difference between insulate and non-isolated power supply;
The difference of Software periodic memory check;